Products
Specialty Products
Specialty Products
How do I care for the floor finish?
Renew™
Description
Intergrain Enviropro Renew is a high performance, water based polish for restoration of the surface finish on all coated floors. Specific use situations may include residential homes, dance floors, shops, bars, halls and stadiums.
Gloss Level
Gloss
Preparation
Prepare previously coated floors by removing previous polishes and build up using an ammonia based floor polish remover.
Application - Resealing
Once the floor has dried after stripping, apply 1 thin coat of Renew at 60m²/L using a pad applicator or cotton mop and allow 1 hour for it to dry. High speed buff the floor with buffing pads after the floor is completely dry. Repeat this process. Inspect the floor for finish and if necessary, repeat the process a third time. Alternatively, if buffing is not a suitable option, apply 2 thin coats of Renew at 60m²/L and allow it to dry overnight.
Application - Maintenance
Damp mop floors with Enviropro Squeaky Clean. If a disinfectant is required, use Envirocare. Bad scuff marks should be removed by rubbing with fine grade nylon pads dipped in Renew. Apply Renew with a pad applicator or cotton mop. Prior to use, allow floor to dry completely or buff floor after Renew has dried.
Packaging Sizes
5L
Please refer to the instructions provided on the Intergrain Enviropro Renew container before commencing your project.